Nightclub Furniture Reupholstery

A nightclub lounge of black tufted curved banquettes under neon lighting
Nightclub upholstery NYC

Recover the whole run, or change the room entirely

Booths, banquettes, bar stools and lounge seating stripped back and recovered for New York clubs — on your dark nights, and mostly without the piece leaving the room.

Three verdicts

Repair one panel, recover the run, or change the look

How far the failure has spread decides this, not how bad the worst seat looks.

A black nightclub club chair with the leather seat split open

Localized damage

One seat is split and the rest of the run is sound. We replace that panel and blend it into its neighbours, which is repair work, not reupholstery.

A nightclub ottoman seat with the finish crazed across the whole top

Extensive wear

The topcoat has crazed across every seat in the row. Once the cover is failing everywhere, patching keeps costing you and recovering stops it.

A red leather curved banquette and club chairs in a nightclub lounge

A new look

Nothing has failed. The room is being rebranded, and the seating has to come back in a different colour and a different material.

The room

What we reupholster

Clubs order the run, not the seat — a VIP row, a whole banquette wall, every stool at the bar, priced and scheduled as one bulk job.

A curved black tufted VIP booth in a nightclub
VIP booths
A curved tufted leather banquette under club lighting
Curved banquettes
A straight black tufted wall banquette with marble tables
Wall banquettes
A black tufted chesterfield lounge sofa in a nightclub
Lounge sofas
A round tufted leather ottoman on a nightclub floor
Ottomans
A row of upholstered bar stools along a nightclub bar
Bar stools
Under the cover

What the old cover has been hiding

Once the cover is off, the foam and the support deck are visible for the first time in years. That is when the real condition of a seat shows up.

Collapsed upholstery foam lifted out of a nightclub seat

Foam that has bottomed out

Foam under a bottle-service seat compresses flat and stops springing back. Nothing you do to the cover fixes a seat that has gone hard.

Sagging webbing and springs exposed under a stripped banquette seat

The support deck

Under the foam sit webbing and springs. Slack straps let the seat sag in the middle long before the cover looks worn.

A rebuilt seat base with fresh high-density foam before recovering

Rebuilt, then recovered

Both get put right while the cover is off — including high-density foam where the old block is dead.

Before and after

Same frame, same room, new cover

Left is the seat as we found it. Right is the same piece once the old cover came off.

A black curved nightclub booth before and after reupholstery
A curved booth with the seat burst open along the welt.
A cognac tufted nightclub booth before and after reupholstery
Cognac tufting scuffed grey across the seat, back in its own colour.
A burgundy channel-back banquette before and after reupholstery
A burgundy channel back, punctured through both seat panels.
A black nightclub lounge sectional before and after reupholstery
A lounge sectional whose topcoat had flaked down to the backing.
A black corner banquette recovered in emerald green leather
The same black corner unit, recovered in emerald on its original frame.
A cream leather nightclub ottoman before and after reupholstery
Dye transfer burned into a cream ottoman top — replaced, not cleaned.
Materials

Materials built for nightlife

Denim dye, spilled sugar and a closing crew with solvent decide this, not the swatch book.

A black commercial vinyl upholstered ottoman corner

Commercial vinyl

The default for high-turn booths: wipes clean, takes solvent and holds colour under LED. See the material.

A cognac genuine leather upholstered ottoman corner

Genuine leather

Used where guests put their hands: bottle-service seating, club chairs and the top roll.

A burgundy faux leather upholstered ottoman corner

Faux leather

Reads as leather at arm’s length and costs less across a full run. See the material.

An emerald performance velvet upholstered ottoman corner

Performance velvet

Deep colour under coloured light, with a cleanable backing behind the pile.

A charcoal woven performance fabric upholstered ottoman corner

Performance fabric

Solution-dyed and woven, for backs and wall panels that never take a spill. See the material.

Leather and vinyl upholstery sample swatches fanned out on a table

Custom and designer goods

Your designer’s specified material, run through the same wear checks as ours.

Styles and details

Tufting, channels or plain — decided at the pattern stage

The frame does not dictate the look. Deep buttoning holds spills in the wells; smooth panels wipe down fastest at close.

Deep button tufting on a black leather nightclub booth back
Deep tufting
Vertical channel stitching on a burgundy leather banquette back
Vertical channels
Horizontal channels across a burgundy leather club chair seat
Horizontal channels
Contrast piping along the edge of an upholstered nightclub seat
Contrast piping
Decorative twin-needle topstitching on a brown leather arm roll
Decorative stitching
A plain smooth upholstered panel on a nightclub seat
Smooth panels
Before you book

Colour changes, phased runs and what drives the price

We are rebranding. Can the seating come back in a different colour?

Yes, and it is the cheapest way to change a room. The frames, the springs and usually the foam stay where they are; only the cover changes, so a black VIP row can come back emerald or burgundy without buying new furniture. We match the colour to a sample, a paint chip or your brand spec, then check it under your own lights before the run is cut.

Can you build new booths to match the ones we are recovering?

Yes. Where a room has gained a corner or lost a unit, we build the new piece to the same dimensions, pattern and material as the run being recovered, and cut both from the same lot so they read as one set. Send the floor plan with the quote request and we will price the new build and the recover together.

Can we recover half the booths now and the rest next quarter?

Yes, and phased runs are common. The risk is the batch: vinyl and leather are dyed in lots, and a lot bought months later can read differently under coloured light. We record the exact spec at the first quote and, where the maker allows it, reserve material for the later phase so both halves come from the same run.

What decides the price of recovering a whole run?

Yardage first, then pattern. A tufted curved banquette eats more material and far more labour than a straight wall bench of the same length. After that it is foam condition, whether the piece is bolted down or loose, and how many dark nights we get. Runs are quoted as one volume job rather than seat by seat.

Cognac leather club chairs and marble tables in a nightclub lounge
Get a number

Show us the whole run, not the worst seat

Photograph the row end to end, then one close-up of the seat that is furthest gone. That is enough to price the job and to tell you whether it is a repair, a recover, or a colour change.

Or call (347) 310-7483.

Scroll to Top